Automatically Opened Door; Information; Printouts - RADWAG 3Y Series User Manual

15.3.1. Automatically opened door

This menu section comprises settings on automatic opening and closing
door of a balance featuring such mechanism, i.e. balances MYA 3Y and XA
3Y.A series. The settings may refer to the quick access keys as well as the
infrared proximity sensors located on the overlay of balance's terminal.
Settings for a balance MYA 3Y series cover:
o Left door / the option enables changing the position of the door on the left
side of the weighing chamber
o Right door / the option enables changing the position of the door on the
left side of the weighing chamber
o Open / Close door / the option enables changing the position of the door,
e.g. if the weighing chamber is opened, then activating the option causes
closing it. If the weighing chamber is closed, then activating the option
causes opening the door located on the right side of the weighing chamber,
Settings for a balance XA 3Y.A series cover:
o Open / the option enables opening the door of the weighing chamber
o Close / the option enables closing the door of the weighing chamber
o Open / Close door / the option enables changing the position of the door,
e.g. if the weighing chamber is opened, then activating the option causes
closing it. If the weighing chamber is closed, then activating the option
causes opening the door of the weighing chamber.

15.4. Information

Information on weighing process is
displayed in the grey coloured workspace.
It contains maximally 6 pieces of
information. If larger amount of data is
selected, then only the first 6 are
displayed. Each parameter features two
option:
- YES, information enabled (displayed in
the workspace)
- NO, information disabled

15.5. Printouts

Menu printouts comprises two separate sections. The first one is standard
printouts, the other one is non-standard printouts.
Standard printouts

comprises three internal sections featuring different variables. For each
variable set option YES to include it in a standard printout. If option NO is
selected, then the variable is disabled, i.e. it is not printed.
- 62 -