Non-Standard Printouts; Inserting Text - RADWAG AS R2.PLUS User Manual

8.3. NON-STANDARD PRINTOUTS

The balance software enables entering 4 non-standard printouts. Each of them can consist of
approximately 160 characters.
Non-standard printout may include:
•
variables dependent on the working mode and other needs (mass, date etc.)
•
permanent text from the user menu, remember to use capital letters exclusively, no Polish
signs allowed
•
Non-standard printout can consist of 160-character long string.

8.3.1. Inserting Text

List of variables mutual for all working modes, having the same values:
%%
Printout of a "%" character
%V
Current net mass in the current unit
%N
Current net mass in the basic unit
%G
Current gross mass in the basic unit
%T
Current tare mass in the basic unit
%D
Current date
%M
Current time
%I
Balance number
%R
Program number
%P
Project number
%U
User number
%F
Name of a current function – working mode
%C
Date and time of the last adjustment
%K
Type of the last adjustment
%S
Currently weighed product
%Y
Deviation for the last adjustment
%1
Variable 1
%2
Variable 2
Variables depending on the currently used working mode
Variable Description
%W
Standard mass 1 pcs
%H
High threshold
%L
Low threshold
%A
Target mass
%B
Reference mass
Non-standard characters used in designing non-standard printouts
\\
a single „\" character
\C
CRLF
\R
CR
\N
LF
\T
Tabulator
\F
Form feed (for PCL printers)
%E
Crop the paper for EPSON printers
Every single printout can contain max 160 characters (letters, numerals, non-standard characters,
spaces). You can apply non-standard characters depending on type of data that is to be printed out.
Mode for which the variable is active
PARTS COUNTING
CHECKWEIGHING
DOSING
PERCENT WEIGHING
- 28 -