27.6. Control start procedure
To start control:
a user with corresponding access level should be logged in.
•
Caution:
Logging procedure and access levels are described in chapter 8 – LOGGING.
Select appropriate product with correctly entered data, when the data is
•
entered in regard to control
Enter weighing mode parameters into balance memory,
•
Batch number – for identification of controlled products batch.
Batch quantity – software will control specified number of samples.
Average tare estimation – option for average tare estimation, number of
packagings needed for its estimation, more than 10.
Remove load from a weighing pan,
•
- 142 -