Printouts - RADWAG 3Y Series User Manual

each field is editable and enables inserting user values,
Caution:
While in calibration process, the order of tested volumes corresponds to
the order in which they are entered.
• On setting correct values return to the main window.

24.4. Printouts

Option Printouts enables setting the content of a standard printout as well
as the non-standard printout.
Standard printout

comprises four internal sections featuring different variables. For each
variable set option YES to include it in a standard printout. If option NO is
selected, then the variable is disabled, i.e. it is not printed.
Settings for header printout, weighing printout, and footer printout are
specified in point. 15.5; below description refers to setting a printout
template for report on pipette calibration.
Content of each of reports:
− Working mode
− User
− Client
− Pipette
− Serial no.
− No. of channels
− Channel no.
− Number of measurements
− Operation with ISO 8655
− Start date
− End date
− Water temperature
− Temperature
- 114 -