9. Standard liquid
10. Standard liquid density
11. Temperature
12. Plunger volume
13. Mass of steel standard
14. Mass of aluminium standard
15. Density of steel standard
16. Density of aluminium standard [density determination of air]
17. Weighing 1
18. Weighing 2
29.8. Controls
Each product control carried out on a balance is sent to a connected printer and
saved in the <
features its specific number set at the moment of its completion.
Control number format:
X / y y / M M / d d / H H / m m, where:
X -
control type which takes the following values:
U – control regulated by the act,
Z – control completed by a user,
W - control regulated by an internal criteria
yy – year of control end,
MM – month of control end,
dd – day of control end,
HH – hour of control end,
mm – minute of control end.
Balance user can preview data on each control.
Procedure
• Enter submenu <
manual,
• Enter <
List of parameters defined for a control:
1. Batch number
[name of liquid used for determining density
measurement of solid object]
[temperature of liquid used for carrying out a
measurement, density determination of solid
object]
[mass measurement of tested sample or a
plunger in the air, or mass of measured steel
standard]
[mass measurement of tested sample or a
plunger in liquid, or mass of measured aluminium
standard]
Controls>database. Each control saved in the database
Databases> in accordance with point 27 of this user
Controls>database and select a desired control record.
[density determination of solid object]
[density determination of liquid]
[density determination of air]
[density determination of air]
[density determination of air]
(not available in standard balance version)
[batch no. of a controlled product]
- 167 -