Statistics; Setting Of Keys And Workspace For Statistics Mode - RADWAG 3Y Series User Manual

23. STATISTICS

Working mode<
measurements and carrying out statistical calculations. The range of statistical
data is conditioned by mode's internal settings.
Working mode activating procedure
while in the main window, press
•
display, which opens a submenu <Working modes> with selection of
available working modes,
select < Statistics> mode, the software automatically returns to the
•
main window and displays
The grey coloured workspace contains the following data:
o N
o SUM
o X
o MIN
o MAX
o SDV
On selecting the statistics mode, the display contains the following
quick access keys in the bottom bar:
1. Setup – access to balance's menu
2. Print header – print of data declared
in the header
3. Print footer – print of data declared
in the footer
4. Database of products – selection of
products from corresponding
database
5. Set tare
6. Statistics
7. Add to statistics

23.1. Setting of keys and workspace for Statistics mode

When carrying out a series of measurements, bear in mind below data on
operation of keys:
Statistics> enables acquiring data form a series of
pictogram in the upper bar,
(no. of samples)
(total no. of samples)
(mean value from a series)
(minimal value in a series)
(maximal values in a series)
(standard deviation)
soft key located in the upper bar of the
- 104 -