Table of Contents
Advertisement
4. STARTUP
On plugging the balance to mains, instrument's diode ON/LOAD
•
Press powering key
•
overlay. Within a few seconds, the OS Windows CE and RADWAG
software start loading, which is signaled by flickering red diode
ON/LOAD.
On completing the startup procedure, the instrument's displays main
•
window of the balance software.
The balance starts up with no user logged in. In order to start operation,
•
a user has to log in. (logging procedure is described further in this user
manual).
CAUTION: Remember to start the balance with no load on the weighing pan.
5. BALANCE KEYBOARD – FUNCTION KEYS
Key
located on indicator's housing is lit up.
located on the upper left section of terminal's
Description
Switching the instrument ON / OFF
Zeroing
Tarring
Sending measurement result to a plugged printer or
computer
Function key (entering instrument's menu)
Working mode selection, (programmable key)
User profile selection, (programmable key)
Internal adjustment, (programmable key)
- 26 -
Advertisement
Table of Contents
