Profile Structure - RADWAG 3Y Series User Manual

Deleting a profile
Procedure:
Enter balance's main menu by pressing Setup key,
•
Enter submenu < Profiles>,
•
Press and hold an entry with profile name that should be deleted,
•
A menu is opened with a list. Select option <Delete> from the list,
•
A message box is displayed which requires confirming profile's deleting:
•
<Confirm to delete>,
Accept the message box by pressing
•
Caution
:
Deleting a profile is only enabled after logging in as an Administrator

14.2. Profile structure

Each profile contains the following entries:
Settings
This menu enables setting an individual profile's name (a
sequence of alphanumeric characters), and declaring a
default working mode (the selected mode is activated as
default on profile selecting).
Working Contains the following submenu:
modes
Readout
Contains the following submenu:
Units
Menu enables declaring the start unit, the supplementary
unit, 2 custom units and entering the value of gravitational
acceleration force in balance's operation place.
 Additional setting of a working mode
 Function keys
 Displayed information
 Printouts
 Filter
 Value release
 Autozero
 Autozero: Dosing
 Last digit
key, the profile is deleted.
- 55 -
.