Additional Settings Of Formulation Mode - RADWAG 3Y Series User Manual

On selecting the formulation mode, the display contains the following
quick access keys in the bottom bar:
1. Setup – access to balance's menu
2. Print header
3. Print footer
4. Formulation – selection of a formulation from corresponding database of
formulas
5. Formulation multiplier (Formulation start if option <Multiplier editing> is
set to <NO>, i.e. disabled)
6. Target mass
7. Formulation without a database

22.1. Additional settings of formulation mode

The additional settings enable adjusting the working mode to user's needs and
requirements. To access the setting follow below procedure:
Procedure:
1. Press grey coloured workspace,
2. The display indicates menu of: Settings, Keys, Information, Printout
and Profile,
3. Press <Settings> key,
4. The display indicates functions related to formula making process.
Formula making process is related to the following functions:
− Automatic ingredients' naming:
o
o
− Apply tare from database of tare values:
YES, each of used ingredients has a tare value assigned in
o
accordance with a product saved in the database of products;
NO, tare is not applied
o
− Means of of ingredient verification:
The option enables selecting a relation used for determining correct
mass of ingredients during formula making process. TOLERANCE/
THRESHOLDS
YES
NO
- 96 -