Table of Contents
Advertisement
•
Press
button to print report on a printer connected to the balance.
•
Press
to get back to setting window of <
printing the report.
Caution:
For cooperation with <
printout. All data is automatically sent to a computer program, report may be printed by means of a computer.
If during the control course the number of negative T errors detected by the software requires
controlling another sample from the batch (as specified by the regulation on CPG), then on
completing the measuring process of sample 1, the following message is displayed:
Press
button to confirm, the text and permissible errors quantity get updated.
Upon completion of second sample control the software generates summary of the control. Report on
performed control may be printed on a balance-connected printer.
Caution:
For example and a template of a report on average tare determination and product control go further down this
user manual.
28.9. NON-DESTRUCTIVE EMPTY-FULL CONTROL MODE
It is possible to preset in a product data batch portion to be measured in a Non-destructive empty-
full control.
E2R System> summary process message shall not contain a query for report
Prepacked Goods Controls> mode without
- 115 -
Advertisement
Table of Contents
