A Report On Sqc - RADWAG 3Y Series User Manual

If a series already exists in the database, press field with its name to edit
•
data that is optionally editable
List of parameters defined for a series:
1. Name
2. Code
3. Client
4. Samples
5. Number of samples

29.13. A report on SQC

Each completed product control is sent to a connected printer and saved in the
<SQC Reports >database. Each record (control) saved in the database features
its individual number assigned at the moment of control end.
Control number format:
y y / M M / d d / H H / m m / s s, where:
yy – year of control end,
MM – month of control end,
dd – day of control end,
HH – hour of control end,
mm – minute of control end,
ss – second of control end.
The user can preview data contained in each of control records.
Procedure:
Enter submenu <
•
manual,
Enter database < SQC Reports > and press a needed record from a
•
completed control.
List of parameters defined for a control:
1. Batch number
2. Start date
3. End date
4. User
5. Product
6. Batch quantity
7. Average
8. Standard deviation [Average standard deviation]
9. Min
10. Max
11. Number of T2- errors
Databases > in accordance with point 27. of this user
[Batch number of a controlled product]
[Date of control start]
[Date of control end]
[Name of operator carrying out a control]
[Name of controlled product]
[Number of controlled samples]
[Average value from completed measurements]
[Minimum value of completed measurements]
[Maximum value of completed measurements]
[Quantity of –T2 errors]
- 171 -