Dosing - RADWAG 3Y Series User Manual

18. DOSING

Working mode<
obtaining a pre-defined target mass.
Working mode activating procedure
while in the main window, press
•
display, which opens a submenu <Working modes> with selection of
available working modes,
select <
•
window and displays
The grey coloured workspace contains the following data:
o Tare
o Gross
o Target value
o Tolerance – percent [%] value related to the target value
o Product
On selecting the dosing mode, the display contains the following quick
access keys in the bottom bar:
1. Setup – access to balance's menu
2. Print header – print of data declared in the header
3. Print footer – print of data declared in the footer
4. Database of products – selection of products from corresponding
database
5. Set tare – field for setting numeric value of tare
6. Target value – for declaring the Target value of dosing process
Dosing> enables carrying out the sampling process, until
Dosing > mode, the software automatically returns to the main
pictogram in the upper bar.
soft key located in the upper bar of the
- 75 -