Animal Weighing - RADWAG 3Y Series User Manual

Use of data contained in the header and footer.
Should data from header and/or footer be used, follow below procedure:
o Press <
procedure,
o Carry out density determination procedure
 A report is printed automatically on completing the second
measurement (Weighing 2),
 When density determination result is displayed, it is possible to print
it for numerous times by multiple pressing of <
o Press <
determination procedure.
Caution
:
Remember to select data to be printer in the header, footer and report. For
details see section "PRINTOUTS".

21. ANIMAL WEIGHING

Working mode<
objects in motion. In principle, this type of objects generate unstable
measurement, thus it requires using a different filtering method of
measurement signal.
Working mode activating procedure
while in the main window, press
•
display, which opens a submenu <Working modes> with selection of
available working modes,
select <
•
the main window and displays
The grey coloured workspace contains the following data:
o Averaging time
o Threshold
Print header> soft key before starting density determination
Print footer > soft key after completing the density
Animal weighing> enables reliable determining mass of
Animal weighing> mode, the software automatically returns to
soft key located in the upper bar of the
pictogram in the upper bar,
5
10
- 92 -
PRINT > key,