Working Mode Selection - RADWAG 3Y Series User Manual

Pipette calibration
Means of operation: calibration of pipettes according to
procedures listed in ISO 8655 or according to user
requirements.
Differential weighing
Means of operation: analysis of mass sample change over
time.
Statistical Quality Control
Working mode is intended to carrying out different types of
product packing processes and aimed at monitoring and / or
controlling the packing process. It enables detecting excess or
lack of product quantity in a
Control of Prepacked Goods
Working mode intended for CPG (Control of Prepacked Goods)
processes in accordance with the regulation on prepacked
goods.
Mass control
Working mode intended to carrying out quick statistical control
of samples in accordance with the requirements on a quality
system and/or internal standards.
The settings of separate working modes include special functions specific to a
mode. They enable adapting mode's operation to user's individual needs. The
special settings are activated on selecting a corresponding profile. A detailed
description of special functions is provided while presenting each of working
modes.

15.1. Working mode selection

Changing working mode:
o Press name of active working mode, displayed in the left corner of the
upper bar.
o List of available working modes is displayed,
o Select name of a desired working mode, and press it.
packaging.
(mode not available in balance's standard version)
(mode not available in balance's standard version)
- 60 -