Alde Compact 3010 Control Panel; Operating Instructions - Swift Tourer Owner's Handbook Manual

ALD E HE AT IN G
Twin-axle caravan:
The easiest way to bleed the heating system is
to place the vehicle on a sloping surface or to
raise one end of the vehicle using a jack. Bleed
the system as described above.
FAULT FINDING
The boiler does not start
1. No LPG? Incorrect type for conditions?
2. Is the main tap fully open?
3. If the boiler has not been operated for
some time, or if the gas cylinder has been
changed, it may take longer than normal
to light the boiler.
4. Check that the boiler is connected to the
electricity supply (> 11V).
5. Check that the fuse (T) for the boiler
is intact.
6. Check whether the electric connections on
the boiler are securely in position.
If none of the above helps, contact a
service workshop.
The heating cartridge is not working
1. Check that there is an electricity supply
(230V ~) to the heating cartridge.
2. Check that the relays fitted to the boiler
come on (a slight click can be heard from
the relays when the heating cartridge is
switched on at the control panel).
If none of the above helps, contact a
service workshop.
110

OPERATING INSTRUCTIONS

CONTROL PANEL 3010 613
Please read these instructions carefully
before using the boiler. For operating and
installation instructions of boiler, please
see separate instruction. These instructions
are for the Alde Compact 3010 boiler fitted in
vehicles, boats and buildings in accordance
with CE no. 0845 BP0003, installation in
vehicles e500 00005 and EMC e503 261.
Installation and repairs may only be carried out
by a professional. National regulations must be
adhered to.
1. Starting the boiler
1. The control panel and the boiler are
switched off.
2. To start the boiler, press the On/Off button
and the start-up display is displayed. The
boiler starts with the last selected setting.
3010