Swift Tourer Owner's Handbook Manual page 141

evaporate these droplets switch on the frame
heating with button (6).
The operating time of the frame heater can
be set to 2 hours, 5 hours or continuous
operation. After selecting the operating time
using the button (6), the temperature level
indicator (8) is extinguished for a short time to
show the set operating time for a few seconds.
The display then returns to the temperature
level indicator.
Operating time: 2 hours
Press button (6) once
1x
Operating time: 5 hours
Press button (6) twice
2x
Permanent operation
Press button (6) three times Display
3x
6 8
Fig. 18
i
after switching on and then switches itself off
and on again at time intervals of 5 minutes.
Door locking
Display
Display
Open the door by pressing the locking button
and pull open (see Fig. 24).
Shut the door again by pushing it to close. The
snapping into the lock can be heard.
While the vehicle is parked, the locking hook
may be fixed to facilitate opening of the door
(Fig. 26-27).
Fastening and releasing the door lock
hook when parking the vehicle
If the vehicle is parked for a longer period
of time, the locking hook may be clamped
by means of a lockbar. The door may now
be opened by just pulling it without need of
pressing the locking button.
!
CAUTION!
In order to prevent discharge of the onboard
battery, change the frame heater from
continuous operation to another operating
time or switch it off.
The frame heater is active for 30 minutes
!
CAUTION!
As a basic rule, shut and lock the refrigerator
before you start your journey!
Fig. 24
Fig. 25
139