Control Panel - Swift Escape 664 Quick User Manual

Control Panel

The control panel for the electrics is located above the habitation door, this uses touch
buttons for switching both 'on' and 'off'.
The panel goes to sleep, and it may be necessary to touch a button twice to have the
desired effect. (The first touch wakes the panel).
Press the Power button to activate the panel.
LED light indicators for Power and Water Pump will illuminate when powered on.
Internal lights
Fresh water level
Outside
Waste water level
Awning light
230v mains indicator
Vehicle battery
level
Leisure battery
level
Quick view of all
Water pump
Switch between
Switch main levels – battery and
power
leisure battery
power on
water
and vehicle
battery
The vehicle has two 12v batteries, one for starting the engine and the other 'leisure
battery' for all the appliances (lights, water pump, 12v outlet, fridge, cooker ignition,
toilet flush). Everything within the motorhome will work without the requirement for 240v
hook-up.
If the panel starts to beep, this means the fresh water tank is either empty or full (when
filling). If this happens a red LED will flash as well as the beeping. Turn off the water
pump and take the necessary action to stop the warning (by filling with water or turn off
filling hose).
The 12v battery will charge when the engine is running, so if you see that the voltage of
the leisure battery has fallen to a low level, you can either hook-up to 240v mains or run
the engine for 10-15 minutes to recharge (please do not do this at night as you may
disturb your neighbours).