Swift Tourer Owner's Handbook Manual page 114

ALD E HEATI N G O PERATI N G I NS TR U CT ION S
4. Set the required temperature
The temperature can be set from +5°C to
+30°C in steps of 0.5°C. Warm water is always
available (50°C) when the boiler is on and
running on LPG or electricity. During summer,
when only warm water is required, adjust the
temperature setting to below the surrounding
temperature so that the central heating pump
does not start.
1. The temperature displayed is the
temperature which is set at present (in this
case 22.0°C).
2. Raise the temperature by pressing the
+ button. Lower the temperature by
pressing the – button.
3. The settings are ready and the central
heating pump will work at the set
temperature.
112
5. Extra warm water
If you need more warm water, you can raise
the water temperature temporarily from 50°C
to 65°C. After 30 minutes, the boiler reverts
to normal operation. When you have selected
more warm water the circulation pump stops.
1. Increase the quantity of warm water by
pressing the + button. When activated the
plus symbol changes colour to green.
2. The settings are ready.
If you wish to revert to the basic warm water
settings before 30 minutes have expired.
1. Reset the warm water by pressing the –
button.
2. The settings are ready.