Swift Tourer Owner's Handbook Manual page 164

C AS S ET TE TOI LET
breakdown of waste, reduce the formation
of gas, protect moving parts and help to the
waste holding tank fresh and clean. For the
differences between the distinguishing qualities
of each waste holding tank product please visit
www.thetford.eu
The range of available Toilet Care products
may vary for each country.
Use of your toilet
Turning the bowl
Opening the blade
Electric blade (if applicable)
Press the flush button to activate the control
panel. Then push the Electric blade button.
The blade will open or close electrically.
Flushing the toilet
162
You can turn this bowl to a
desired position (max. ±90°C).
Close the cover and use both
hands to rotate the bowl as
illustrated.
The toilet can be used with
the blade open or closed.
To open the blade, slide the
blade sideways as illustrated.
Make sure you always close
the blade completely after use.
Press the flush button once
to activate the control panel.
Then press the flush button
for several seconds to flush
the toilet.
Electric ventilator (if applicable)
By activating the control panel, the Electric
ventilator start automatically. The button will
flash to indicate this function is active. To
stop the Electric ventilator, press the button.
Press the button again to restore the Electic
ventilator. To optimise its function, activate
the Electric ventilator before use of your
toilet.

Even without an own flush water tank you
can still use Aqua Rinse for a smooth and
fresh lavender scented flush. Simply spray
Aqua Rinse with a spray can evenly into the
toilet bowl before use.

Ordinary toilet paper can cause clogging.
Use Aqua Soft toilet paper instead. This
toilet paper is super soft, dissolves quickly,
prevents clogging and makes it easier to
empty the waste holding tank.
Level indication
You can check whether your waste holding
tank has a 1 level or a 3 level indication. Make
sure the tank is empty and place it properly.
Then activate the control panel. If no level
indication light lights up, your toilet has a 1
level indication. It will only indicate a full tank. If
a green level indication light immediately lights
up, your toilet has a 3 level indication. It will
indicate empty, half full and full.
Emptying the tank
Waste holding tank
When the red light of the level indicator on the
control panel lights up, you need to empty
the waste holding tank. Remove the tank via
the service door. Then take it to an authorised
waste disposal point. Empty the waste holding
tank via the pour out spout.