Windows; Heki-2 Roof Light (Seitz); Mini Heki Rooflight - Swift Tourer Owner's Handbook Manual

W IN DOWS / B L IN D S / H E K I R OOF LIGH T

WINDOWS

To open turn catches through 90°. Push open
the window to the desired position and tighten
stays.
To close the window, losen stays and slowly
close again, turn the catches through 90°
to close.
All opening windows have two catch positions.
The first position is for ventilation the second
seals the window from ventilation and rain.
WINDOWS/
ROLLER BLIND ADVICE
In case of prolonged exposure to the sun roller
blinds should not be completely closed as this
could cause excessive heat concentration at
the top of the window, due to characteristics
of the glazing material the windows could be
adversely affected.
Roller blinds that shade from the bottom
upwards it is necessary to leave a gap of a few
centimetres open at the top, this way the heat
between window and blind can escape. A fly
screen does not cause an obstruction.
Roller blinds that shade from the top
downwards must be kept completely open,
or be opened regularly to allow the heat to
escape.
Keeping the windows in ventilation position
allows heat to escape.
Never fully close a roller blind system when
storing the vehicle or when not in use for
longer periods!
Therefore for optimal window life it is
recommended:-
- Blinds starting at the bottom of the window a
gap should be provided for ventilation at the
top with the window in its ventilation position.
- For vehicles containing blinds from the top
downwards or with other types of reflective
blinds / curtains, please make sure that these
blinds are also ventilated or not fully closed.
Ensure that all windows and roof vents are
closed when the vehicle travels on the road.

HEKI-2 ROOF LIGHT (SEITZ)

The lift/tilt roof light can be set in 3 positions by
means of pneumatic springs.
Position 1 lifts the pane 12mm without allowing
rain to enter the caravan.
Position 2 sets the pane to a 150mm opening
and locks with a bar.
Position 3 opens the pane through 55°.
A fully adjustable flyscreen and black-out
screen are built into the inner frame. The
flyscreen can be drawn independently and the
black-out screen is variable for partial or full
black-out.
Forced ventilation functions via a brush lined
duct instead of a ventilated pane.
A cover hood can be fitted for winter
protection.
Heki-2 roof lights provide 13,200mm2 of
fixed ventilation.

MINI HEKI ROOFLIGHT

To open depress button and push bar
upwards. The rooflight has two open
ventilation positions and a fully open position.
The blind and flynet operate independently of
each other and are engaged by connecting to
each other and sliding.
Heki care instructions: Clean the blind only
with a damp sponge. Clean on a regular basis
to avoid dust/ dirt particle build up as this can
damage the blind material. Use only water or
with mild suds or a vacuum cleaner.
In order to avoid material fatigue, do not leave
the flynet closed for a long time.
171