Alde Compact 3010 Control Panel - Functions And Symbols - Swift Motorhome Owners Service Manual

Operating instructions control
panel Alde 3010 613
Please read these instructions carefully before
using the boiler. For Operating and Installation
Instructions of boiler, please see separate
instruction. These instructions are for the Alde
Compact 3010 boiler fitted in vehicles, boats
and buildings in accordance with CE no. 0845
BP0003, installation in vehicles e500 00005
and EMC e5 03 261.Installation and repairs
may only be carried out by a professional.
National regulations must be adhered to.
1. Starting the boiler
1. The control panel and the boiler are
switched off.
2. To start the boiler, press the On/Off button
and the start-up display is displayed. The
boiler starts with the last selected setting.
A green LED comes on beside the On-/Off
button when the panel/boiler is on.
A LDE H E AT ING
2. The control panel in standby mode
Note: if "Standby Brightness" is set to Off,
the display goes out when it enters standby
mode, but lights up if you press the screen.
See settings under 9.12.
A. Clock
The clock shows day and time. Theclock is set
under section 9 point 2.
B. Outdoor temperature
The outdoor temperature is displayed
only if an outdoor temperature sensor is fitted.
C. Indoor temperature
The indoor temperature is displayed automati-
cally.
D. Circulation pump
This symbol is displayed when circulation of
the central heating is called for.
E. LPG bottle full/empty
This symbol is displayed when the sensor on
the cylinder changeover is connected and acti-
vated in accordance with section 9 point 8.
F. 230 volts
This symbol is displayed when 230V is con-
nected to the boiler.
G. MENU button
Button for setting menu.
H. On/Off button
Shut down / turn on the boiler
119