Swift Tourer Owner's Handbook Manual page 92

ELEC T R ICS
To disconnect equipment, raise socket cover
and remove plug, then close and latch the
cover into place to ensure a weatherproof seal.
Before moving the caravan from a pitch ensure
that all accessory points are disconnected and
latched in the closed position to prevent the
ingress of water or other foreign matter from
causing damage to the point or any of the
caravans services.
Any item plugged into this socket will be
supplied by the same 10A breaker (MCB) as
the other items plugged into sockets within
the caravan. Please take into account the
total loading placed on the socket circuit and
the site supply before switching equipment
on. The socket should be used to power a
single appliance with an appropriate power
consumption rating – the socket is NOT
suitable for use as a supply to power an
adjacent caravan or motorhome.
90