Swift Tourer Owner's Handbook Manual page 136

D OM ET IC REF RI G ERATOR
MANUAL ENERGY SELECTION /
AUTOMATIC IGNITION (RM 8XX1)
MES (FRIDGE MODELS)
1 2
1 - Power ON/OFF switch
2 - Energy selector button 230V ~
3 - Energy selector button GAS
4 - Energy selector button 12V =
6 - Temperature level selection
7 - Temperature level display
8 - Indicator LED failure / Reset button
GAS FAILURE
Switching ON/OFF
• Switch ON by pressing button (1), 2s
• Switch OFF by pressing button (1), > 2s
230V AC operation
• Select "Mains voltage" by pressing button (2)
• Set temperature step by pressing button (6)
12V DC operation (vehicle's battery)
• Select "Battery voltage" by pressing
button (4)
• Set temperature step by pressing button (6)
Gas operation
• Select "Gas" by pressing button (3)
• Set temperature step by pressing button (6)
134
3 4 6 7
RM 8XX1 MODELS
MES appliances (manual energy selection)
Electrical operation
1
8 9
Fig. 7
To start the refrigerator, press button (1) for 2
seconds.
The refrigerator starts with the last selected
type of energy.
230V operation :
Press button (2) :
12V operation :
Press button (4) :
Gas operation
Gas operation :
Press button (3) :
The ignition process is activated automatically
by means of an automatic igniter.
i
The flame extinguishes after reaching the
preset cooling compartment temperature
and ignites again if the cooling compartment
temperature increases again. If the flame is not
lit after the first ignition attempt, the automatic
igniter repeats the ignition twice (duration 30 s)
at time intervals of 2 minutes. If the flame is not
lit afterwards, a fault is indicated.
2
3 4
3
Fig. 16
Fig. 17