Swift Tourer Owner's Handbook Manual page 190

AL-K O ATC CO N TR OL S YS TEM
Display
Colour
Green
Green
Flashing
Red
Red flashing
LED not
working
188
ATC Diagnosis
Condition
ATC Active Everything
Ok
ATC Active Self test
incomplete
ATC Possible to
Inactive continue
journey
ATC has Do not
detected a continue
fault. a fault
with ATC
connected
ATC has no Check push
power rod position
as shown
LED faulty
on page
5 before
continuing
journey.
What to do Outcome
Drive forward Green (
to detect Constant)
movement
to complete
self test and
recheck LED.
Remove 12S Green
or 13 Pin
plug and wait
5 seconds. Red
Reconnect
plug.
Remove 12S Green
or 13 Pin
plug and wait
5 seconds. Red
Reconnect (flashing)
the plug
Remove 12S Green
or 13 Pin
plug and wait
5 seconds. LED not
Reconnect working
the plug.
Check for
constant
live - refer
to system
requirements.
Status
Ready for
journey
Ready for
journey
ATC Error
logfile memory
exceeded.
Caravan can be
towed, but ATC
will not apply
caravan brakes
in the event of
instability.
See below *
Ready for
journey
ATC faulty,
and cannot be
driven. Remove
push-rod as
shown on page
5. Consult
AL-KO, see back
page for details.
Ready for
journey
If power ok,
check push rod
position: Red
line visible - do
not drive vehicle.
Red line not
visible - possible
to continue
journey but
consult AL-KO
see back page
for details.