Swift Tourer Owner's Handbook Manual page 178

OM NIV EN T
Use rooflight
- Close the lid before driving
- To take away the roller blind, unscrew and
click the frame off the side of the knob.
Use of the ventilation
- The ventilator is started by the soft switch
S2. The middle LED light lights up and the
ventilator starts in comfort mode, this is the
lowest speed (extract). See fig 18.
- By pushing on the switch S1 (extract) or
S3 (intake), the airflow can be adjusted in 6
steps. See table 19.
*MIN = 3,7 m
*MAX = 24 m
- In order to save the battery, the speed drops
from position 6 to the lowest position after
one hour of use.
- It is possible to allow the ventilator to work
for 5 minutes on the highest speed (boost).
To do this push for 3 seconds on the button
176
/min (2 W - 0,17 A)
3
/min (86 W - 7,20 A)
3
S1 (extraction) or S2 (intake). After 5 minutes
the ventilator returns to its previous speed
setting. See table in fig 20.
- For reasons of security, the ventilator, the
ventilator stops when the tension is too high
(19,5 V) or too low (11,1 V) or when the fan is
blocked. For trouble shooting see fig 21.
Maintenance
The ventilator grid can be removed for
cleaning. Also the mosquito screen can be
taken out for cleaning.
Remark on the transport of the caravan
with Omni-vent
The roof light is only waterproof in the direction
of the traffic. When transporting the caravan in
the opposite direction, or when the back of the
caravan is up, ensure the dome is watertight
by using the 'Lock-unlock' (not supplied on a
ventilator version) or by using something that
ensures that the dome remains closed when
being transported.