2.6 Control Panel Operation - Swift Tourer Owner's Handbook Manual

Fresh water
level gauge
Leisure battery
voltage gauge
Tank fill on/
off button

2.6 Control Panel Operation

• Power Button. Press the power button to
turn the leisure power on. Press the button
again to turn the power off. The adjacent
LED will illuminate when the power is
on, and also the voltage of the selected
battery will be displayed on the
voltage gauge.
• Pump Button. With the power on, press
the pump button to turn the water pump
on. Press the button again to turn the
pump off. The adjacent LED will illuminate
when the pump is on, and also the level
of the water tank will be displayed on the
water gauge.
• View Levels. To display the battery
voltage levels and the water tank levels on
the control panel gauges, press the levels
button. The display will remain illuminated
for 10 seconds. It is possible to lock the
EC451 - Caravans with water tanks
Leisure battery
Mains supply
selected LED
& charger on
Power on/off button
Water pump
on/off button
EC442 - Caravans without water tanks
•
•
Vehicle battery
Vehicle battery
selected LED
selection button
View levels button,
press to show
battery & tank levels
display 'on' to allow continuous display.
This can be achieved by pressing and
holding the view levels button for 2-3
seconds until you hear a beep. To turn
this locked feature off, either press and
hold the view levels button again for
2-3 seconds or turn the power off and
back on.
Battery Select. By default, the leisure
battery is selected as the power source
if no mains supply is present, or as the
battery to be charged when the mains
supply is available. To change the selected
battery, press the vehicle battery select
button. The selected battery is indicated
by an LED adjacent to the caravan or car
logo.
Mains on indication. When connected
to a 230v supply the LED with a "lightning
strike" shown will be illuminated.
Vehicle battery
voltage gauge
73