Swift Tourer Owner's Handbook Manual page 81

Owner’s service and warranty handbook
Table of Contents

Advertisement

The following table shows details of the fuse(s)
located at the Road Light fuse box, on the
front wall inside the front bed.
Fuse
Rating
1
20 Amps
2
5 Amps
3
5 Amps
4
5 Amps
5
6
20 Amps
7
5 Amps
8
5 Amps
9
7.5 Amps
10
5 Amps
3.5 System Status and Configuration
display
Depending on specification, the PSU may
feature an LCD display and two control
buttons that allow system information to be
viewed or settings changed.
Press the top yellow 'select' button to change
the item being viewed. Press the bottom red
'change' button to change the setting. Both
buttons work on a continuous loop, so if
you want to return to an item or setting keep
pressing the button until the required item is
reached.
3.6 Water System Operation
The control panel pump button operates the
internal (onboard) water pump. This pump
will draw water from the internal (onboard)
water tank (if fitted) or the external water inlet,
depending on the position of the manual
supply selector valve.
The system also incorporates a separate
powered water inlet that can be used with an
external filler pump to fill the internal (onboard)
water tank (if fitted).
Fuse colour
Yellow
Fridge Supply 12V
Tan
Left Hand Tail Lights
Tan
Right Hand Indicators
Tan
Fog Lights
Spare location
Yellow
Car Battery Supply 12V
Tan
Right Hand Tail Lights
Tan
Left Hand Indicators
Brown
Stop Lights
Tan
Reverse Lights
user when the fresh water level drops below
25% or when the waste water level reaches
100%. If the water pump power is turned on
and the fresh water level drops to below 25%
a warning beep will be heard and the fresh
gauge empty LED will flash. To cancel the
warning, press the levels button.
If the water pump power is turned on and the
waste water level rises to full (100%) a warning
beep will be heard and the waste gauge full
LED will flash. To cancel the warning, press
the levels button. These warnings will not be
repeated unless the water pump power switch
is turned off and on again.
This is to ensure the warning does not become
a nuisance.
Description
79

Advertisement

Table of Contents
loading

Table of Contents