Table of Contents
Advertisement
Output Resolution Setting
•
AUTO: Click to set the output resolution to Auto mode (default setting). The output resolution may vary based on the connected
display's native resolution.
•
MANUAL: Click to set the output resolution to Manual mode. In Manual mode, click the down arrow to select a specific output
resolution as required.
•
APPLY: Click to set the output resolution to the desired setting.
Network
Device IP Mode:
•
DHCP: When enabled, the IP address of the VPX-1701 will be assigned automatically by the connected DHCP server.
•
Static: When the VPX-1701 fails to obtain or detect an IP address from the network to which it is connected, select "Static" to set
up the IP address manually.
•
APPLY: Click to set the network setting.
Allow 2-3 minutes for the device's LAN module to reboot and reconnect after the network setting is changed.
User Manual - VPX-1701
26
Advertisement
Table of Contents
