i3 International SRX PRO User Manual page 92

Chapter 1. SRX-Pro Server
Tip
In the E-Mail Setup tab, check Enable E-mail
for Video Loss to receive an e-mail every
time video loss occurs on one of the chan-
nels.
Tip
Take into account the active time for the
selected control. The control active time is
configured in the Hardware Setup.
Tip
To use this feature, ensure that there is a
blank CD-R/DVD-R at all times in the optical
drive.
Port Speed (baud) field displayed the initial default baud rate set by the I/O board. The baud rate set on the PTZ camera
will override this initial port speed. This parameter is hard-coded and cannot be modified by the user.
1.4.10.5. Video Loss Alarm
Video Loss Alarm allows automatically initiating control and/or sound alarm upon video loss of one or more video channels.
To configure the Video Loss Alarm menu, do the following:
1. Check the Enable Control checkbox to enable control function for Video Loss Alarm
2.
Click the Browse button
2 will be activated after the video loss detection.
3. Check the Enable Alarm checkbox to initiate audible alarm after the video loss detection.
4. Set Working Time for an audio alarm and selected control. In the example above, after the video loss has been
detected on one or more video channels, the audible alarm will sound on the PC speaker for 5 seconds and Control
2 will be activated for 5 seconds (provided the video loss detection does not conflict with control active time, if ap-
plicable).
5.
Click the Save button to save the configured settings
Related Topics: Hardware Setup-Control Settings | E-Mail Setup
1.4.10.6. Panic and Sensor Backup
Configure the recording settings for the main screen's Panic button feature and/or associate the backup with specific
sensor(s). If a Sensor is triggered, or the Panic button
a CD-R/DVD-R.
By default, the sensor/Panic button feature backs up 5 minutes of video recording prior to the sensor/Panic button ac-
tivation. The user, however, can configure the length of time that DVMS will record after the sensor/Panic button activ-
ation.
to select desired control from the drop-down menu. In the example above, Control
is clicked, an encrypted video backup will be burned onto
88
System Setup