i3 International SRX PRO User Manual page 120

Chapter 1. SRX-Pro Server
Note
If the Enable Audio checkbox is checked off,
the chosen *.wav file will be played locally
on the DVMS.
a. Check off the Send Email checkbox to send an emergency Email every time that the alarm is triggered in this
detection zone. The email address must be first configured in the Email Setup tab.
b. Check off the Enable Audio checkbox to play the audio file on the DVMS every time that the alarm is triggered
in the Area.
c. Select the Sound Wave File for the audio alarm
i.
Click the Browse button
triggered
ii. Click Open
d. Set the Duration of Sound (1 – 100 sec) to determine how long the *.wav file will play
6. Configure the Detection Type Setting for the selected detection zone by selecting one of the following conditions:
a. In the Condition drop-down menu, choose any to trigger an alarm every time human/vehicle/object presence is
detected in the defined area.
b. In the Condition drop-down menu, choose "=" (equal to) in the drop-down menu and enter the desired number
of persons/vehicles/objects. This way the alarm will be triggered only if the specified number of persons/vehicles/ob-
jects is met in the defined area.
c. In the Condition drop-down menu, choose ">=" (greater or equal to) in the drop-down menu and enter the desired
number of persons/vehicles/objects. This way the alarm will be triggered only if the specified number of per-
sons/vehicles/objects is met or exceeded in the defined area.
116
and locate the *.wav sound file that will play every time that the alarm is
VideoLogix™