i3 International SRX PRO User Manual page 117

Chapter 1. SRX-Pro Server
Note
Each VideoLogix™ channel must be con-
figured separately.
1.4.18.2. Configuring VideoLogix™
To configure the common channel settings, do the following:
1.
In the Current Channel field, click the Browse button
VideoLogix cannot be configured on IP channels.
2. Check off the Enable VideoLogix checkbox to enable the VideoLogix™ module for the selected channel. In the example
above, VideoLogix™ is configured for Channel 1. Note that the maximum frame-per-second rate on the channels
configured for VideoLogix™ is 13 FPS. When the channel is configured for VideoLogix, the frame rate is automatically
adjusted to 13 FPS.
3. Choose the Control # in the drop-down menu for the selected VideoLogix™ channel. When the alarm is triggered
on the selected VideoLogix™ channel, the configured control will be activated. In the example above, Control 1 will
turn on when the VideoLogix™ alarm is triggered on video Channel 1.
4. Set Object Min Size. This pixel value is the minimum pixel heigh that the human form has to represent on the live-
view screen in order to be detected by VideoLogix™. By default, this value is set to the absolute minimum value of
8 pixels. Any objects smaller than the selected object minimum size will not be recognized.
113
to select the desired analog video channel. Note that
VideoLogix™