i3 International SRX PRO User Manual page 35

Chapter 1. SRX-Pro Server
Warning
All information will be erased from selected
drives!
4. Check off Used for recording check boxes for all drives/partitions that will be used for SRX-Pro video recording
and click OK to format selected drives/partitions.
5. Click OK in Formatting Drives window to proceed.
6. Click OK in Format Option window. Note that the format is pre-set to NTSC.
7. Wait for the following message to be displayed: "Storage drives have been allocated" and click OK to finish. SRX-
Pro Server software will then load normally. To learn how to allocate additional drives/partitions for video recording,
refer to Storage Setup section.
Refer to Starting SRX-Pro Server section for further instructions on using SRX-Pro Server software.
31
First Software Startup