i3 International SRX PRO User Manual page 130

Chapter 1. SRX-Pro Server IP Camera
ForAction sending, call PTZ interface from the camera. Gipi will support PTZ interface on the camera. This interface
will be used to control the camera.
To select Gipi functionality, the user must select his feature on the hardware setup page. Gipi will then acquire PTZ
functions which are available from the IP module and enable/disable functions in Generic PTZ type.
Through Gipi, some functionalities supported include:
1. Pan/Tilt - Right, Left, Up, Down.
2. PTZ Speed.
3. Zoom.
4. Preset.
pan/tilt (right, left, up, down)
In addition, SRX-Pro Server supports the following IP and Megapixel cameras:
In addition, SRX-Pro Server supports the following IP and Megapixel cameras:
SONY: SNC-CS10, SNC-CS11, SNC-CS3N, SNC-RX550, SNC-RZ30, SNC-RZ50
ELMO: PTX 401C, SN2230, TD4114
AXIS: 214 PTZ, 233D, P3301, M1011, M1031, Q1755, 209 Series (via VAPIX Version 2 and 3, firmware 4.xx and 5.xx)
MAVIX: MediaRacer@100, MediaRacer@150
Arecont: AV1300, AV2100, AV3100, AV5100
IQinvision: IQ501, IQ511, IQ511DV IQ702, IQ752, IQ703, IQ753 IQ705, IQ755
ANNEXXUS 101M module supports the following resolutions:
1. 352x240 - (max. 1 video input per IP module; max. 30 fps per input)
2. 720x240 - (max. 1 video input per IP module; max. 30 fps per input)
3. 720x480 - (max. 1 video input per IP module; max. 30 fps per input)
ANNEXXUS 104 module supports the following resolutions:
1. 320X240 (max. 4 video inputs per IP module; max. 30 fps per input)
2. 640x240 (max. 3 video inputs per IP module; max. 30 fps per input)
3. 640X480 (max. 1 video input per IP module; max. 30 fps per input)
4. 720x480 (max. 1 video input per IP module; max. 30 fps per input)
ANNEXXUS 204 module supports the following resolutions:
1. 360x240 (max. 4 video inputs per IP module; max. 30 fps per input)
2. 720x240 (max. 4 video inputs per IP module; max. 15 fps per input)
126