i3 International SRX PRO User Manual page 102

Chapter 1. SRX-Pro Server
Note
Only sensors enabled in the Hardware Setup
are displayed.
Note
Only controls enabled in the Hardware Setup
are displayed.
d. Drag and drop the desired sensor icon onto the E-Map bitmap image in the drawing area. The sensor icon will be
added onto the image.
e. Click on the Control icon to display all available control icons:
respectively.
f. Drag and drop the desired control icon onto the E-Map bitmap image in the drawing area. The control icon will
be added onto the image.
5.
Click the Save button to save the configured settings
1.4.12.3. Delete the Channels/Controls/Sensors from an E-Map
To delete Channels/Controls/Sensors, do the following:
1. Click on the Channel, Control, Sensor icon in the E-Map image.
2. Drag and drop the channel, control or sensor icon from the image back to the list of channels, controls, sensors on
the right. The icon will disappear from the image.
1.4.12.4. Delete the E-Map bitmap image
To delete/change the E-Map bitmap image, do the following:
1. Select the tab with the desired E-Map in the drawing area.
2.
Click Delete or click the delete icon
3. In the E-Map Deletion message, click Yes to delete or No to return to the E-Map setup.
1.4.12.5. E-Map on the Main Screen
To view the E-Map on Live Mode, click the Live button
Viewer menu. The E-Map window will be displayed in the center of Main Screen as a separate window. E-Map Viewer
window can be moved around the main screen as needed.
By clicking on any channel icon on the E-map, the corresponding channel will be brought to full-screen mode.
.
to go to the Main Screen. Click on Tools -> E-Map
98
E-Map Setup
. The icons represent Light and Alarm controls