Chapter 2. SRX-Pro Remote
SRX-Pro Remote Setup
2.2. SRX-Pro Remote Setup
Before connecting to the remote site, the user can configure the Display Mode used by SRX-Pro Remote. To access SRX-
Pro Remote Setup, disconnect from all connected sites and click the Setup button
.
The Remote Setup window will be displayed.
Select the desired Display Mode between DirectX and RGB. DirectX is the preferred and recommended display mode
as it offers substantially higher quality video image. In cases when DirectX is not installed on the system or is not available
(is used by another program), select RGB display mode.
Usually, video cards with less than 64MB will not support DirectX.
Check the Start Remote with password checkbox to force the user to enter password on every SRX-Pro Remote
startup. This is an effective way of preventing any unauthorized users from connecting to the remote sites. To change
the password, check off Start Remote with password checkbox and restart the SRX-Pro Remote software. Leave
unchecked to skip the authorization process.
185