i3 International SRX PRO User Manual page 26

Chapter 1. SRX-Pro Server
1. Insert the installation CD into the CD-ROM and locate the SRX-Pro Server installation file: Setup.exe
2. Double-click the setup file to initiate the installation process
3. In the installation Welcome screen, click Next
4. In the License Agreement screen, scroll down to the end of the document to familiarize yourself with i³ Software License
Agreement. Select the I Accept button to proceed with the installation.
5. In Select Installation Folder screen, select installation drive and folder by clicking Browse... or keep the default in-
stallation folder.
Depending on whether local PC has multiple users, select either Everyone or Just me radio button to determine
who will be using SRX-Pro Server software, then click Next.
6. In Confirm Installation screen, click Next to proceed with the installation
7. Wait while the SRX-Pro Server software is installing onto the local system.
Important: If WinPcap 4.0.2 software application is not present on the system or an earlier version is installed,
WinPcap Installer window will be displayed. Follow the instructions to install the correct WinPcap version on your
SRX-Pro system. You must complete WinPcap installation if requested, otherwise SRX-Pro Server will not be installed.
8. Wait for the Installation Complete screen to be displayed and click Close.
9. The Apache window will be displayed. Click Yes to restart your system immediately. Make sure to save all work in
progress before restarting. Refer to First Software Startup section for further instructions.
22
First-Time SRX-Pro Server Installation