i3 International SRX PRO User Manual page 101

Chapter 1. SRX-Pro Server
Note
Only channels enabled in the Hardware
Setup are displayed.
1.4.12.2. Configuring E-Map
To configure the E-Map, do the following:
1. Enter the E-Map Name. Use the keyboard or the virtual keyboard if necessary. In this example, the new E-Map name
is "Unit12".
2.
Click the Browse button
perimeter map.
3. Click Add to copy the selected image to the drawing area. The Image will appear in the screen on the left side of
the Setup window. The new E-Map name will be displayed on the tab directly underneath the drawing.
4. In the right side of the drawing area, choose the Channel, Control or Sensor to be positioned on the E-Map
a. Click on the Channel icon to display all available camera icons. The first 16 icons represent possible camera
angles. The last icon represents a speed dome camera.
b. Drag and drop the desired channel icon onto the E-Map bitmap image in the drawing area. The channel icon will
be added onto the image.
c. Click on the Sensor icon to display all available sensor icons:
sensors respectively.
in the E-Map Image File field to locate and select existing digital image of the
97
E-Map Setup
. The icons represent Fire, Laser and Heat