i3 International SRX PRO User Manual page 164

Chapter 1. SRX-Pro Server
b. Select desired channel(s) to show which sensor(s) triggered the video recording for the selected channel(s). In this
example, Channel 9 was recording based on Sensor 1 and Sensor 2 activation.
c. Select any sensor to view more details about sensor-triggered video recording: Begin Time, End Time and Filter,
where Filter value is the Sensor number). In this example, Sensors 1 and 2 were selected.
d. To view a specific instance, click the desired entry on the right-most panel in the index search window. The selected
instance will be displayed in the search timeline bar.
1.5.10.1.3. Motion Index Search
Select Motion Search to view all video recorded based on motion detection. This information can be further filtered
by isolating motion-triggered video recording based on either Channel or Motion Detection area number.
By Motion Detection Area number:
1. The first column will display all motion areas associated with specific channels, where motion was detected. In this
example, motion was detected in motion detection Area 1 of Channels 7,11 and 12. See Motion Setup section for
more information.
160
Advanced Search Panel