Upgrading Ad-2016/Ad-2816 Capture Card Drivers - i3 International SRX PRO User Manual

Chapter 1. SRX-Pro Server
Caution
Do not unplug the HASP key while video is
being recorded! Keep HASP key plugged in
at all times, while the system is recording
video. Only remove HASP key to transfer
SRX-Pro Server software to a different local
PC.
7. Plug the HASP key into the USB port on the local PC. Keep the HASP key plugged in at all times.
8. To ensure that the driver installation was successful, right-click on My Computer and select Manage from the context
menu.
9. In the Computer Management window, go to Device Manager, expand Universal Serial Bus controllers list and look
for the following entries: Aladdin HASP Key, Aladdin USB Key. If the entries are present in the list, the drivers
were installed correctly. If not, try re-installing the drivers by following steps 1-7. If the HASP key is still not recognized
by the system, please contact our technical support team for help at 1-877-877-7241

1.2.4. Upgrading AD-2016/AD-2816 Capture Card Drivers

SRX-Pro Server software (v.1.500 and up) requires video capture board driver version 3.4 for AD-2016/AD-2816 capture
card and version 1.0 for AD-3016 capture card. Correct driver version will be installed on all new DVRs/NVRs during the
production stage, however if your DVR/NVR has an earlier version of SRX-Pro series software, you must upgrade the
capture board driver before upgrading your SRX-Pro Server software to version 2.000.
Upgrading AD-2016/AD-2816 Capture Card Drivers
16