i3 International SRX PRO User Manual page 146

Chapter 1. SRX-Pro Server
c.
In the Include Image of Channel field, click the Browse button
list. A snapshot from this channel will be sent out. In the example above, snapshot from Channel 2 will be sent
out every hour to the configured email address.
d. Enter the Email Title for the server status e-mail alerts (Optional).
4. Intelli-Guard™ alert
Intelli-Guard™ function can be configure to sent out an email alert every time the motion has been detected. (See
Intelli-Guard™ section for more information).
1.4.24.1. Configuring Email Setup
1. Check off the Enable Email checkbox to enable Email feature.
2. Fill in the Send To section:
a. Enter the Email Address of the recipient
b. Enter the Threshold number. This value refers to the total number of emails sent when a sensor is triggered or
video loss is detected.
3. Fill in the Send From section:
a. Enter the Name of the sender (Optional)
b. Enter the Email Address of the sender
4. Fill in the SMTP Server section: Depending on the location, each Internet provider has specific SMTP information.
Obtain this information from your Internet provider.
a. Enter the IP Address of the SMTP server. Ask your provider for SMTP server address.
b. Enter the Port number. It is not usually necessary to change the port number. Most SMTP servers have a default
port. For more information on default Ports, contact the email account manager.
c. Select the Login Method. "None" is the default method; otherwise, contact the email account manager.
142
E-Mail Setup
to select the desired channel from the