Hardware Setup - Control Settings - i3 International SRX PRO User Manual

Chapter 1. SRX-Pro Server
Important
Only Administrator User, i3dvr, has permis-
sion to configure this setup.
Tip
Hardware Setup tab can be hidden from
select users in User Management setup tab.
11.
Click the Save button to save the configured settings
Related Topics: PTZ mode | Hardware Setup-Sensor Settings | Spot Monitor | Motion Setup | Schedule Setup |
Video Setup |User Management Setup

1.4.2. Hardware Setup - Control Settings

1.4.2.1. Overview
Control Settings are applicable only if controls are available and are being used.
Active Time
Active Time refers to the designated time when the control is active (is on). The default setting is 0:00:00-0:00:00,
which means the control is always off. The control will be continuously on, if the Active Time is set to 0:00:00 - 24:00:00.
During the Active Time, the control cannot be turned off from the main screen. Outside of the Active Time, the control
can be activated by sensor, or manually from the main screen (Advanced/Tree View only).
Working Sec
Working Sec is the time the control will stay turned on after being triggered by sensor. This does not apply when the
control is turned on manually from the main screen. In other words, if the control is turned on manually from the main
screen, it will stay on until manually disabled by the user. Working Sec also does not apply during the Active Time, when
the Control is continuously on.
1.4.2.2. Creating/Modifying Control Settings
To configure available controls, do the following:
1. Check the All checkbox to enable all controls or enable desired controls by checking individual control checkboxes
2. Give each control a descriptive Name. E.g. "Turn on the light".
3. Set the Active Time for each control if required. In the above example, Control 2 (Turn on the light) is continuously
on between 8:30AM and 5:00PM.
4. Enter the Working Sec time for the control. In the above example, Control 2 (Turn on the light) will stay on for 10
seconds if the associated sensor is triggered outside of the Active Time.
5.
Click the Save button to save the configured settings
Related Topics: Hardware Setup-Sensor Settings | Motion Setup | System Setup | E-Map Setup | Intelli-Guard™ |
Intelli-Zone™ | Video Setup
61
Hardware Setup - Control Settings