i3 International SRX PRO User Manual page 153

Chapter 1. SRX-Pro Server
1.5.2.4.3. Video Recording Bars and Types of Recording
Multicolored bars represent different types of recording.
• the pink bar indicates Continuous Recording (Channel 2 is recording based on Continuous recording schedule)
• the orange bar indicates Sensor Recording (Channel 1 is recording based on Sensor recording schedule)
• the blue bar indicates Motion Recording (Channel 3 is recording based on Motion recording schedule)
• the green bar indicates Sensor + Motion Recording (Channel 4 is recording based on Sensor + Motion recording
schedule)
• the thin purple bar underneath the video recording bars indicates Audio Recording (Channels 1-3 have audio recording)
• the red bar indicates emergency frame rate recording. Remember that emergency frame rate may only be combined
with Continuous recording. (Channel 5 is recording continuously with enabled Emergency Frame rate setting.) The
recording frame rate must be lower than emergency frame rate and the motion detection must be enabled for the
selected channels. See Emergency Frame Rate Recording section for more information.
1.5.2.5. Switching to Daylight Saving Time
Setting the time forward one hour will cause no system confusion. The particular hour jumped will simply be missing
from the timeline. However, a problem may occur when the time is moved back one hour in the fall. When this happens,
the system will have to overwrite the previously recorded hour of information. As a result, valuable information could be
lost, which is why the System time in the SRX-Pro Server can be set forward only.
In order to avoid the loss of information, a 25th hour is added when the Daylight Saving Time ends in the Fall and clocks
are set back an hour. This method of time adjustment prevents the loss of video data and does not "confuse" the system.
I.e: With this method, the timeline will have two instances of '1:00 AM.' This way, the video data will not be lost or re-
corded over, while system time stays correct and up-to-date. Zoom in the timeline to see the time.
1.5.2.6. Playback Control Panel
Playback buttons are located on the bottom of the Search Window.
Skip to the beginning of the recorded data
View previous frame
Reverse playback
149
Search Mode Window