i3 International SRX PRO User Manual page 134

Chapter 1. SRX-Pro Server
Note
Each channel can be linked with only one
IP input at-a-time.
After the new IP video source has been added to the list, some parameters may be adjusted (applies to ANNEXXUS
devices only). Click the Save button after adjusting any parameters. Use Advanced Setup to change settings for
true IP cameras and ANNEXXUS 300-series and 400-series modules.
a. Resolution. Choose from available resolutions. Applies to selected models of IP modules only. Resolution for IP
cameras must be adjusted through the Advanced Setup of each individual IP input.
b. FPS (frames-per-second rate). Applies to selected models of IP modules only. Resolution for IP cameras must be
adjusted through the Advanced Setup of each individual IP camera.
This frame rate setting is used for recording. This frame rate is also used on Live Mode, while IP input is in the
full screen mode. When any other screen division is selected, IP input will be displayed at 1-3 fps rate.
c. PTZ protocol for cameras connected to the IP module (applies to selected models only)
d. Input's custom Name
e. Channel Input. Each IP input can be linked to any number of video Channels. In the example above, Channel
#1 will display IP input at 192.168.10.63, Channel 7 will display IP input at 192.168.10.99, etc.
Video channels can also be linked with IP inputs in the Hardware Setup tab. To link video channel to IP input,
select the desired IP input's address in the Video drop-down menu. See Hardware Setup section for more inform-
ation.
8. While IP input is selected in the All Cameras list, it is displayed in the live view window. The following information
will be displayed in the Selected Camera Info frame: input's IP Address, Frames Per Second rate, and input's current
resolution.
9. To restart the corresponding IP module/IP camera, click Restart IP.
10. To access Advanced Setup of the IP module/camera (if available), click Advanced Setup. Camera's setup will be
launched via Internet Explorer, setup for IP module will be displayed in a separate window.
11.
Click the Save button to save the configured settings
1.4.21.3. Search IP Inputs
Use the instructions below when IP address of IP module/IP camera is unknown and/or when the IP module/IP camera
is located on LAN.
130
IP Camera