i3 International SRX PRO User Manual page 83

Chapter 1. SRX-Pro Server
2. Position the cursor at the desired day and time on the timeline graph. The bottom pop-up time display will show the
exact time.
In the example below, the cursor is pointed at 1:02 AM.
The top pop-up time display will show the length of the recording type at which the cursor is pointed.
In the example below, the cursor is pointed at the time block that is scheduled for Sensor + Motion recording. The
top pop-up time display shows that the channel is scheduled for sensor and motion recording (S) (M) from 1:00 AM
to 2:00 AM
3. To select the desired time, left-click and drag the cursor until the desired area on the timeline graph is selected. The
cursor can be dragged in any direction: horizontally to select time within one day or vertically to select more than
one day at a time.
4. To deselect, repeat step 3 on the previously selected area on the timeline graph.
5. In the Recording Type menu, check desired checkbox. Select on of the following recording modes: Continuous;
Motion; Sensor; Sensor + Motion. In the example below, on Monday, the video channel will record based on motion
from 12:00 AM till 1:00 AM, from 2:00 AM till 2:20 AM and from 2:30 AM onward; based on sensor + motion from
1:00 AM till 2:00 AM and continuously from 2:20 AM till 2:30 AM.
6. Click Apply Settings to, in order to apply created recording schedule to other channels. A new window will be
displayed. Check the video channel checkboxes to apply existing recording schedule to the selected video channel(s).
In the example below, the schedule created for Channel 1 will also be applied to Channels 2-4.
7.
Click the Save button to save the configured settings
79
Schedule Setup