i3 International SRX PRO User Manual page 114

Chapter 1. SRX-Pro Server
Note
Active Time will remain the same for all
detection areas on the selected channel.
Note
Sensitivity will remain the same for all de-
tection areas on the selected channel.
Note
Refresh time will remain the same for all
detection areas on the selected channel.
To configure selected channel for Intelli-Zone, do the following:
1.
Select the Channel # in the Current Channel frame. Click the Browse button
from the list, selected channel will be displayed in the live view window.
2. Check off Enable Intelli-Zone checkbox to enable Intelli-Zone module for the selected channel
3. Select Start Position preset. This is the position the channel will return to after the specified dwell time. Click the
Browse button to select the desired preset from the list. (See Programming Presets section for more inform-
ation).
4. Set Active Time to configure Intelli-Zone™ active time on the selected channel. Intelli-Zone™ will not work outside
of the Set Active Time. In the example above, Intelli-Zone™ will work from 12:00 AM to 11:00 PM on Channel #1.
5. Adjust Sensitivity. The higher the Sensitivity, the less change in an image is needed to set off the alarm. If the
Sensitivity is set to Low, the change in an image will have to be dramatic to be detected as motion. This function
only works properly indoors. The natural changes an outdoor environment (e.g. clouds) can cause false alarms.
6. Set Refresh time. Refreshing an image more often will decrease the cumulative image difference caused by normal
occurrences, such as changing illumination across the period of a day and will reduce the number of false alarms.
110
Intelli-Zone™ Setup
to select the desired channel