Communication Setup - i3 International SRX PRO User Manual

Chapter 1. SRX-Pro Server
Important
Active Time MUST be set, otherwise Intelli-
Guard™ will not work for the selected de-
tection area.
Click the Save button to save the configured settings
IMPORTANT: Ensure there is NO MOTION occurring in the defined area when clicking the Save button, otherwise
the Intelli-Guard™ function will not work properly for that area. This is due to that fact that Intelli-Guard™ detects
16.
changes in the pixels that make up an image as opposed to detecting actual motion. When the Save button is clicked,
Intelli-Guard™ registers the current image as the default image. All consequent changes to that area will be registered.
If motion occurs in the defined area when the Save button is clicked, even the static environment will set off the
alarm.
Related Topics: Hardware Setup-Control Settings| Email Setup

1.4.15. Communication Setup

1.4.15.1. Overview
Communication Setup contains the network type, bandwidth setting, Text Overlay port and Other Ports.
The network type is displayed based on Windows O/S settings and cannot be changed by the user. The Text Overlay port
value should not be changed for the PACDM software to function properly.
1.4.15.2. Configuring Communication Setup
To configure Communication Setup, do the following:
1. Configure Bandwidth. This menu controls the bandwidth of the data transferred over the network. Choose No
Limit to use all the available connection speed to transfer data. If No Limit is chosen, the Server might be slowed
down in cases where multiple users are dialing into the system at the same time.
106
Communication Setup