Precautions (Dvms Models Only); Setting Up Srx-Pro (Dvms Models Only) - i3 International SRX PRO User Manual

Chapter 1. SRX-Pro Server
Warning
i³ systems run on the Windows™ XP Embed-
ded operating system. All i³ DVMS systems
come with pre-installed i³ Software: i³ SRX-
Pro Server, SRX-Pro Player, and PACDM™
(optional). Do not install any additional
software not recommended by i³ Internation-
al on this system. The DVMS should not be
used as a personal computer. Doing so will
jeopardize the performance of the SRX-Pro
software and may result in a system crash.

1.1.4. Precautions (DVMS models only)

When selecting a storage location for the system, be sure to avoid:
• excessive heat, such as direct sunlight or heating appliances
• moisture, dust, and smoke
• magnetic fields or electrical waves
• temperatures below 5° Celsius or 41° Fahrenheit
• any obstructions to system ventilation holes
Before installing this system, always ensure the:
• power source is located within 3 feet or 1 meter of the UPS
• power is switched off (**Do not plug the DVR unit in.)
• system and its connecting cables have sufficient space
• system is placed on an even surface
• system is situated far from electronic equipment such as microwaves, radios, fridge compressors, or any type of
wireless equipment such as a telephones or cell phones)
• system is at room temperature (18° - 25° Celsius or 64.4° - 77° Fahrenheit)

1.1.5. Setting up SRX-Pro (DVMS models only)

Before installing SRX-Pro DVMS, ground yourself. This will remove any static electrical charge your body might be carrying.
Before powering up the DVMS, connect all cables and peripheral devices first. Uninterrupted power
supply (UPS) must be used with the i³ DVMS; otherwise, all warranties will be voided.
To set up the SRX-Pro DVMS, do the following:
1. Plug in the mouse and keyboard.
2. Plug in the monitor VGA cable.
3. Plug in all the BNC video cables.
4. Plug the power cable into the DVMS. (Do NOT power up)
5. Plug the power cable into the UPS (uninterrupted power supply).
6. Power up the system.
Step 1: Plug the mouse and the keyboard into the USB ports on the motherboard.
4
Precautions (DVMS models only)