i3 International SRX PRO User Manual page 143

Chapter 1. SRX-Pro Server
1.4.23.2. Configuring Virtual Ruler
To configure Virtual Ruler setup, do the following:
1.
Click the Browse button
activated in the Hardware Setup tab will be displayed.
2. Check off Show Text Overlay/Virtual Ruler in Mux Display on the Server to see the Virtual Ruler in the live
view window.
3. Select the Color (Black or White) of the ruler that will be shown on the screen. Choose the color that will best contrast
with the background.
4. In the Degree frame, enter the Start Point value of the ruler. This number will be shown at the starting point of
the ruler.
5. In the Degree frame, enter the End Point value of the ruler. This number will be shown at the end point of the
ruler.
6. In the Degree frame, enter the Length of Division value, which is the value of one ruler division. This number has
to be smaller than the length of the ruler, or will be assigned the same value as the length of the ruler. The division
value is the distance (in chosen units: feet, meters, etc.) between two dividers. To obtain the total number of ruler
divisions, the length of the ruler is divided by the Length of Division value.
139
in the Channel # field to select the desired channel from the list. Only channels
Virtual Ruler