i3 International SRX PRO User Manual page 129

Chapter 1. SRX-Pro Server IP Camera
The SRX-Pro Server software supports a number of IP modules and IP cameras. Before using the SRX-Pro Server, all IP
modules and IP cameras must be properly installed and configured. It is important to note that this new version of SRX-
Pro is a single software incorporating SRX-Pro, iP-Pro, and Video Analytics including VideoLogix Recording features. Refer
to the respective manuals in order to properly configure the IP cameras/modules first.
The user will need WAN or LAN to connect to IP cameras/modules. WAN/LAN must be properly configured by the network
administrator before using SRX-Pro Server software.
Even though the IP modules located on WAN are supported, it is highly recommended to use IP modules on LAN ONLY.
Since the Internet connection is less reliable than the network connection, the video recording is a lot more stable and
reliable on LAN.
Currently SRX-Pro Server supports the following IP modules:
ANNEXXUS 100 Series: 101M & 104
ANNEXXUS 200 Series: 204
ANNEXXUS 300 Series: 304, 301, 301C, 301C2M, 301D2M, 316, Ax32V1M4, & Ax32VD14
ANNEXXUS 400 Series: 401C1M, 401C1MN, 401D1M, 401PTZ, Ax41B1MVR, Ax41V1MVR
ANNEXXUS 500 Series: Ax52D2MV, Ax53V1MV, Ax53C1MV, & Ax53C5MV
Note that by connecting analog cameras to ANNEXXUS 104, 204, 304, and 316, their PTZ capabilities may still be used.
SRX-Pro v. 2.00 uses Generic IP Integration (Gipi):
With Gipi, the user is able to control PTZ data sending through either Raw or Action sending.
For Raw data sending send the whole raw data of the RS485 to the camera. Software won't recognize difference in
Camera Protocol, therefore allowing mix of multiple camera IP types.
125