Chapter 1. SRX-Pro Server
1.3.7.4. Programming Preset Tour(s)
Preset Tour is a sequence of selected presets that is displayed continuously until interrupted by user. The Dwell Time
determines the delay time between two consecutive presets.
To create a preset tour, do the following:
1. Program all desired presets in the PTZ mode. (See Managing PTZ Presets for more information)
2.
Click the Preset Touring button
3. Click New to create a new tour
4. Select the desired presets in the Tour Configuration area by checking off the corresponding checkboxes
5. Enter the Dwell Time (Sec) value to determine the delay time between two consecutive presets. In the example
above, the Preset Tour 1 will cause the PTZ camera to switch between Preset 1 and Preset 2 every 5 seconds.
6. Click Save to save configured preset tour
7. To create additional Preset Tours, repeat steps 3-6
To stop touring, do the following:
1.
Click the Preset Touring button
2. In the Tours drop-down menu select NONE.
3. Click Close. The touring will stop.
To delete a preset tour, do the following:
1. In the Preset Touring Manager window, select the Tour from the Tours drop-down menu.
2. Click Delete to delete the unwanted Preset Tour from the list.
. The Preset Touring Manager window will be displayed
. The Preset Touring Manager window will be displayed
52
PTZ mode